1.在塑料筐中盛入纯净水，并放入待洗物品，盖上盖子；

1. Pour purified water into a plastic basket, place items to be washed, and cover with a lid;

注意：清洗物待清洗部分需充分浸入水中，且水位不得过高。

Attention: The part of the cleaning material to be cleaned should be fully immersed in water, and the water level should not be too high.

2.连接电源，指示灯闪烁，确认机器已经通电，确保清洗槽内有适量纯净水；

2. Connect the power supply, the indicator light flashes, confirm that the machine is powered on, and ensure that there is an appropriate amount of pure water in the cleaning tank;

3.待机状态下，调整时间和功率；

3. In standby mode, adjust the time and power;

5.全部设定完毕后，再次按动功率下方“ON”键即可启动；

5. After all settings are completed, press the "ON" button below the power again to start;

4.清洗完毕后，及时将塑料筐中的污水倒入洗手台；

4. After cleaning, promptly pour the sewage from the plastic basket into the washbasin;

5.及时在清洗槽中补充纯净水；

5. Timely supplement pure water in the cleaning tank;

6.归位。

6. Return to position.

注意：

be careful:

1.保持清洗槽内水质干净；

1. Keep the water quality in the cleaning tank clean;

2.注意清洗槽内水位，避免无水、少水及多水状态下开机工作；

2. Pay attention to the water level in the cleaning tank to avoid starting up and working in dry, low, or high water conditions;

3.在保证清洗物件洁净的前提下，尽可能间断性工作；

3. Work intermittently as much as possible while ensuring the cleanliness of the cleaned items;

（一般控制在5～10分钟/次，连续工作时长不宜超过30mins）

(Generally controlled at 5-10 minutes per time, and the continuous working time should not exceed 30mins)

4.请勿使用酒精、汽油等易燃溶液及强碱、强酸等腐蚀性溶液；

4. Do not use flammable solutions such as alcohol and gasoline, as well as corrosive solutions such as strong alkalis and acids;

5.注意用电。

5. Pay attention to electricity usage.

本文由超声波清洗机友情奉献.更多有关的知识请点击: http://m.9yqd.cn真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from ultrasonic cleaning machines. For more related knowledge, please click: http://www.jnthcsb.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned