服务热线电话
400-6188-756
全自动超声波清洗机设备比人工洗好在哪?
来源:http://m.9yqd.cn/ 时间: 2021-06-17 浏览次数: 0
以下是对全自动超声波清洗机设备总结的几个优点:
The following are the advantages of the automatic ultrasonic cleaning machine
一、速度快、效果好
1、 Fast and effective
工业机器的传统清洗采用的是浸泡、蒸汽等耗费大量时间的方法,而且清洗的还不均匀,有口皆碑的超声波清洗器采用的是声波在介质中传导使介质表面脱落的工艺,一般只需要两到三分钟就可以完成清洗,而且采用的声波法其覆盖范围是整个介质不会留下边边角角,这样清洗的设备更加干净。
The traditional cleaning methods of industrial machines are soaking, steam, etc., which take a lot of time, and the cleaning is not uniform. The well-known ultrasonic cleaner uses the process of sound wave conduction in the medium to make the surface of the medium fall off, which generally takes only two to three minutes to complete the cleaning, And the coverage of the acoustic method is that the whole medium will not leave corners, so the cleaning equipment is more clean.


二、非接触清洗全自动超声波清洗机设备
2、 Non contact cleaning automatic ultrasonic cleaning equipment
传统的清洗是浸泡在溶剂池中采用人工对物品表面进行清洗,这样的清洗方法很难保证清洗的彻 底性和安 全性,超声波清洗器采用的非接触清洗可以使整个产品的溶剂中震荡保证每一个角落都可以干净整洁,既节省了大量人力物力也保证了清洗的彻 底。
The traditional cleaning method is to soak in the solvent pool and manually clean the surface of the goods. This cleaning method is difficult to ensure the thoroughness and safety of the cleaning. The non-contact cleaning method adopted by the ultrasonic cleaner can make the whole product vibrate in the solvent and ensure that every corner can be clean and tidy, which not only saves a lot of manpower and material resources, but also ensures the thoroughness of the cleaning.
三、节省
3、 Saving
这里提到的节省包括了清洗溶剂、热能、场地、人工等,传统的清洗耗费时间长需要有大量的场地来摆放溶液池,这样造成了溶液和场地的浪费,超声波清洗器可以做到有机溶液回收利用,因为清洗器的清洗速度快所以不需要很多溶液池共存,综合以上三个方面超声波清洗器在节能减排方面有很大的作用。
The savings mentioned here include cleaning solvent, heat energy, site, labor, etc. traditional cleaning takes a long time and requires a large number of sites to place solution pools, which results in waste of solution and site. The ultrasonic cleaner can recycle organic solution. Because the cleaning speed of the cleaner is fast, it does not need many solution pools to coexist, Combined with the above three aspects, ultrasonic cleaner plays a great role in energy saving and emission reduction.
全自动超声波清洗机设备作为机器清洗的翘楚备受大家喜爱,其清洗过程对产品表面无损伤可以完好保留产品特性,微小的污渍也有可能影响整个设备的使用,超声波清洗器的声波处理可以做到高精度的清洗,不残留微小的污渍颗粒。
As the leader of machine cleaning, automatic ultrasonic cleaning machine is very popular. Its cleaning process has no damage to the surface of the product and can keep the product characteristics intact. Small stains may also affect the use of the whole equipment. The ultrasonic treatment of ultrasonic cleaning machine can achieve high-precision cleaning without leaving small stains.
相关文章
-
金属零件清洗怕踩坑?碳氢清洗机够硬核,难题全搞定! 2025-12-19
-
50Mpa CNC高压清洗机:强力瓦解各类油污、碎屑,工业清洁高效之选 2025-12-19
-
多槽手动超声波清洗机:选对工业清洗设备,效率直接拉满! 2025-12-19
-
喷淋清洗机雾气过大?水雾收集器这样彻底解决! 2025-12-18
-
通过式喷淋清洗机:发动机缸体定制化清洗解决方案,自动化高效赋能车企 2025-12-18
-
多孔盲孔清洗难题?碳氢清洗机凭真空技术精准破解 2025-12-18
-
CNC 高压清洗机:50 兆帕精准冲洗,攻克油垢毛刺难题 2025-12-18
-
CNC高压清洗机:三合一全能清洗,多行业适配的工业利器 2025-12-17
-
碳氢清洗机:环保与高效兼具的工业清洗新选择 2025-12-17
-
多槽手动超声波清洗机:五金行业高效清洗利器,通用性拉满 2025-12-16

新闻中心




公司动态







鲁公网安备37011202000628号